News: Owners Developers & Managers

Why are arc flash studies and warning labels so important? - by John Sloane

John Sloane

Last month, we discussed what an arc flash is, and the purpose of arc flash warning labels. But here’s a quick recap: An arc flash is essentially an explosion caused by a short circuit. When dealing with high-energy electrical equipment, an unexpected short circuit causes the release of electrical energy in the form of heat and pressure, and are generally caused by equipment failure, a fault or surge somewhere else in the system, or human error.

An arc flash warning label gives key information about a particular piece of electrical equipment, usually including voltage, various safety boundaries, and guidance on safety gear required. With this information, an electrician or a qualified worker is able to determine the appropriate level of protection and precaution necessary to begin working on that piece of equipment. 

To determine the information on that label, at Interstate, we have our own in-house electrical engineering team that works hand-in-hand with our electricians and our safety personnel. While not every electrical contract team can have an in-house engineering staff, it is absolutely imperative that they work in tandem with electricians and safety teams to ensure the utmost attention to detail. 

In this industry, that attention to detail goes both ways. Engineers have to make sure they’re assessing the arc flash risk appropriately, meaning they can’t underestimate the potential hazard, but they also can’t be too cautious and overestimate. You might ask, why? What would be the harm in ensuring anyone working on volatile electrical equipment is over prepared for the potential risk? 

Well, when working with commercial electrical equipment, being over prepared could mean anything from wearing a slightly more cumbersome piece of personal protective equipment to requiring power to be shut down to an entire building unnecessarily. Both of those situations would add cost, time, and additional hazards to a project, and those decisions can involve multiple stakeholders.

Arc flash studies, warning labels, and proper precautions are increasingly required by property owners and their insurance companies. Any and all electrical equipment in a facility adds liability for the owners, and it is always in the best interest of everyone involved to make sure the appropriate knowledge is shared to prevent any harm or hazards from happening. Performing an arc flash study before and during construction of a facility can also help mitigate unnecessary costs down the line by making sure each piece of equipment can handle the potential load or will function properly in the case of equipment fault somewhere in the system.

Now you know what those little warning labels are that you see on various types of electrical equipment, and why they are so important. Bottom line, these labels are there for worker safety, public safety, and facility safety.

John Sloane is regional vice president with Interstate Electrical Services, North Billerica, Mass.

MORE FROM Owners Developers & Managers

Mount Vernon Co. acquires John Carver Inn & Spa in Plymouth, MA

Plymouth, MA The Mount Vernon Company (MVC), a Boston-based real estate and hospitality investment firm, has completed the acquisition of the John Carver Inn & Spa, an 80-room property.
READ ON THE GO
DIGITAL EDITIONS
Subscribe
Columns and Thought Leadership
IREM President’s Message: Fostering community connections during the holiday season

IREM President’s Message: Fostering community connections during the holiday season

The holidays are again taking center stage, and with them comes an opportunity for multifamily communities to connect with the businesses and organizations in their cities and towns, fostering a sense of unity and generosity during this giving season
Selecting the right façade installation firm - by Steven Powell

Selecting the right façade installation firm - by Steven Powell

As the owner of a major new property being developed, or an existing large building preparing for major renovation, you want your design and construction team to have the right experience, capabilities, and expertise to match the project demands. A critical member of this team will be the façade installation specialty firm, since the quality of this installation will impact
Recently passed legislation creates opportunities to meet CT’s changing energy needs - by Klein and Feinn

Recently passed legislation creates opportunities to meet CT’s changing energy needs - by Klein and Feinn

For decades, New England has had a summer-peaking power system, where the greatest energy use occurs on the hottest and most humid days, due to widespread use of air conditioning. But by the mid-2030s, electrification of the heating sector likely will result in a winter peak that’s higher than the summer peak.